Order Hot Head Heater Classic
Ready to order a Hot Head Heater? Call Us at (925) 998-7363!
Hot Products Engineering offers several Hot Head pre-heater models, ranging from 750 watt units for single cylinder applications to powerful 4000 watt systems for large cubic inch V8 applications.
2020
220volt single phase or dual 110 volt, 20 amp power input
This 4000watt system features dual 2000 watt heating modes that work to quickly pre-heat a racing engine. Once heated and raced, the system can be operated in a maintenance mode to keep the engine at its optimal temperature while not placing added demand on the team’s generator. This pre-heating system will work on any water cooled 8cylinder automotive based engine.
1515
220volt single phase or dual 110 volt power input
This 3000watt system features dual 1500 watt heating modes that work to quickly pre-heat a racing engine. Once heated and raced, the system can be operated in a maintenance mode to keep the engine at its optimal temperature while not placing added demand on the team’s generator. This pre-heating system will work on any water cooled 4cylinder automotive based engine.
Integrating check valve
[HPE-CV-1.5-KT]
- Shown 1-1/2″ hose application kit – Check calve, dry break fittings, dust caps and hose clamps
[HPE-CV-1.75-KT]
1-3/4″ hose application kit – Check calve, dry break fittings, dust caps and hose clamps.
Male quick disconnect
[HPE-MQD-MPT]
Male quick disconnect fitting w/ ½” FMPT
Hose Kits
Two hoses that aid the installation of integrating check valves. Comes with four high-quality hose clamps
[HPE-HK-1.5]
1-1/2” for standard application
[HPE-HK-1.75]
1-3/4” for standard applications
Remote Kits
Includes: Push-lock hose, remote braket (tube or panel mount), high quality fittings and dust caps.
[HPE-REM-PM-PKG]
Remote kit package – Panel mount
(1-1/2” or 1-3/4”)
[HPE-REM-PM-PKG]
Remote kit package – tube mount
(1-1/2” or 1-3/4”)
Dust Caps
[HPE-DC-BLK]
Dust Cap with tether – Black
Hose Clamps
[HPE-WDHC-1.5]
Worm drive hose clamps 1-1/2”
[HPE-WDHC-1.75]
Worm drive hose clamps 1-3/4”
Power Cord
Two hoses that aid the installation of integrating check valves. Comes with four high-quality hose clamps
[HPE-PC-220V-25]
25’, 220V power cord w/twist lock ends
[HPE-PC-220V-50]
50’, 220V power cord w/twist lock ends
[HPE-PC-110V-50]
50’ 110V power cord w/twist lock ends
Power Cord Splitter
[HPE-SPL-110V]
220V to dual 110V power cord splitter (3000W only)
